How to Use Concrete Calculator
- Choose the project type.
- Enter the dimensions (and number of holes or steps).
- Read the cubic yards and bags – add prices to compare costs.
Concrete Calculator Features
- Four project types: slabs, footings and walls, round columns and steps.
- Bags and yards: 40, 60 and 80 lb bags plus cubic yards, feet and meters.
- Waste allowance: 5 or 10% extra.
- Cost comparison: ready-mix vs bagged.
- No account needed: open the page and start right away, free.
- Stays on your device: processing happens locally, so nothing is sent to a server.
- Any device: desktop or mobile, in Chrome, Safari, Edge or Firefox.
Bag Yields
| Bag size | Yield | Bags per cubic yard |
|---|
| 40 lb | 0.30 cu ft | 90 |
| 60 lb | 0.45 cu ft | 60 |
| 80 lb | 0.60 cu ft | 45 |
Example
A 10 × 10 ft patio at 4 in thick is 10 × 10 × 0.333 = 33.3 cu ft = 1.23 cubic yards. With 10% extra that is 1.36 cubic yards, or 62 bags of 80 lb mix – at that size ready-mix delivery is usually easier and cheaper.
Who Uses the Concrete Calculator?
- DIY patios, sidewalks and shed bases
- Fence and deck post holes
- Contractors estimating pours
Frequently Asked Questions
How thick should a concrete slab be?
4 in for patios, sidewalks and shed floors; 5–6 in for driveways and anything carrying vehicles or heavy loads.
How many bags of concrete for a fence post?
A 10 in wide, 36 in deep hole holds about 1.6 cu ft. A 4 × 4 post takes up about 0.25 cu ft, leaving roughly 1.4 cu ft – three 80 lb bags (or four 60 lb bags). Enter your hole size for an exact count.
Bags or ready-mix?
Bags are practical up to about 1 cubic yard. Above that, ready-mix delivery saves a lot of mixing; ask about short-load fees for small orders.
How much does a cubic yard of concrete weigh?
About 4,000 lb (roughly 145–150 lb per cubic foot).
Why add extra?
Forms bow slightly, ground is never perfectly level and some concrete is always left in the mixer or wheelbarrow. 5–10% extra prevents running short in the middle of a pour.
How do I calculate concrete for steps?
Choose Steps and enter the width, tread depth, rise per step and number of steps. Each step is calculated as a solid block from the ground up and added together.
How long does concrete take to cure?
You can usually walk on it after 24–48 hours and drive on a driveway after about 7 days. Concrete reaches most of its design strength after 28 days; keep it moist for the first week for the best result.